Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 14)

Publication 1758-UM002D-EN-P - October 2010
14 DataSite Configuration Settings Utility (DS Settings)
This function lets you initialize the DataSite controller back to factory
defaults.
• HART Settings
This function lets you configure and send HART commands.
Hardware and Software
Requirements To install DS Settings, you need the following:
• an IBM-compatible PC with at least a 80486 microprocessor
(Pentium-166 and above),
• a CD-ROM drive,
• at least 70 MB of free hard disk space,
• at least 32 MB of memory (64 MB recommended),
• a VGA graphic card, and
• Windows NT 4.0, Windows 2000, or Windows XP Professional.