Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 32)

Publication 1758-UM002D-EN-P - October 2010
32 DataSite Configuration Settings Utility (DS Settings)
Download the Controller Communication Settings to the
Controller
Follow these steps to download (write) the controller parameter settings to the
controller.
1. Set up system parameters.
2. Click Download.
3. Change the baud rate of COM2 to 19200, and then click Download.
The message "Download to controller successful" appears.
4. Click Upload.
IMPORTANT
When connecting via a certain serial port of the controller,
see COM2 as shown.