Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 122)

Publication 1758-UM002D-EN-P - October 2010
122 DataSite Flow Configuration Utility (DS FloConfig)
The current date and time of the RTC appears.
Calibrate the Real-Time Clock (RTC)
Follow these steps to calibrate the RTC.
1. Under Time Set, enter the date and time in the corresponding boxes.
You can also use the current PC time by selecting the Use PC Time
check box.
2. Under Time Set, click Set.
The RTC is set to the date and time entered.
TIP
You should calibrate the RTC after initializing the DataSite
controller.