Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 20)

Publication 1758-UM002D-EN-P - October 2010
20 DataSite Configuration Settings Utility (DS Settings)
4. If you have chosen a COM port, set up the parameters for the serial port
connection.
5. To confirm the PC settings and close the window, click OK.
To cancel the configuration and close the window, click Cancel.
Parameters for Serial Port Communication
Parameter Value range
Station number 1…247
Baud rate (bps) 2400, 4800, 9600, 14400, 19200, 38400, 56000, 57600
Timeout (1 s) 1…10
Delay time (1 ms) 0…3000
TIP
When you click OK, the system will automatically save the
PC settings into a default file. The file name is
PC Communication Parameter.cfg, located in the current
project directory.