Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 93
Advertising
Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 93
3.
From the Tools menu, choose Controller Initialize.
4.
Select the Connect Controller check box.
5.
Power up the DataSite controller.
6.
When "US Download!" appears in the Infomation box, clear the
Connect Controller check box.
The DataSite controller has successfully gone into the Service mode.
Advertising
This manual is related to the following products: