Upload the configuration file, Save the configuration file – Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 257
Publication 1758-UM002D-EN-P - October 2010
DataSite DNP3 Configuration Utility (DS DNP3) 257
Upload the Configuration file
To view the DNP3 configuration of the DataSite controller, upload it to the
PC.
Follow this step to upload the DNP3 configuration.
•
From the Control menu, choose Upload.
You can also click the Upload button
on the toolbar.
Save the Configuration file
The DNP3 configuration file can also be saved into a file. In this way, when
you want to apply this configuration to a different DataSite controller, you can
download the configuration file directly to the controller, instead of re-creating
the configuration from scratch.
To save the current configuration file:
1.
Start DS DNP3.
The current configuration files are opened. If there are no configuration
files, save the current configuration file to the current directory.
2.
From the Control menu, choose Save.
You can also click the Save button
on the toolbar.