Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 42)

Publication 1758-UM002D-EN-P - October 2010
42 DataSite Configuration Settings Utility (DS Settings)
Insert a Scan Block
Follow these steps to insert a scan block.
1. In the Scan Settings dialog box, select a scan block.
2. Click Insert.
An Invalid scan block is created and inserted above the block you
selected in Step 1.
3. Double-click the block to edit it.
4. To save the changes and close the Edit dialog box, click OK.
To close the Edit dialog box without saving, click Cancel.
Delete a Scan Block
Follow these steps to delete a scan block.
1. Select the block you want to delete.
2. Click Delete.
A dialog box prompting you to confirm the deletion appears.
3. To confirm the deletion, click OK.
To cancel the deletion, click Cancel.