Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 129)

Publication 1758-UM002D-EN-P - October 2010
DataSite Flow Configuration Utility (DS FloConfig) 129
Clear Accumulation
Follow these steps to clear the value of all the accumulated variables of a
meter.
1. In the configuration tree, click the Meter Run item for the meter you
want.
The Meter Run dialog box for that meter appears.
2. Click Clear.
IMPORTANT
There is no Undo for the Clear function. Use this function
cautiously.