Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 16)

Publication 1758-UM002D-EN-P - October 2010
16 DataSite Configuration Settings Utility (DS Settings)
Create a New Project
Follow these steps to create a new project.
1. From the File menu, choose New Project.
The New Project dialog box appears.
2. Enter the project name, for example, DS_RTU.prj.
3. Click OK.
The new project file, DS_RTU.prj in this example, is created in
C:\Program Files\Rockwell Automation\DS Settings\DS Settings
Project.
The file is opened in the project browser.
Save a Project
Follow this step to save a project using its current file name.
• From the File menu, choose Save.
The project file, DS_RTU.prj is saved in the current location. In this
example, it is C:\Program Files\Rockwell Automation\DS Settings\DS
Settings Project.
Follow these steps to save the project into a different file.
1. From the File menu, choose Save As.