Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 132)

Publication 1758-UM002D-EN-P - October 2010
132 DataSite Flow Configuration Utility (DS FloConfig)
4. Click Finish.
The following dialog box appears.
5. Click No followed by OK.
The flow meter will calculate the flow according to these values of T, P,
and DP/PI.
Display the Field Parameters of a Meter Run
Follow these steps to display the field parameters of a meter run.
1. In the configuration tree, click the "+" symbol for the desired meter
run. Meter Run0 is used as an example here.