Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 156)

Publication 1758-UM002D-EN-P - October 2010
156 DataSite Flow Configuration Utility (DS FloConfig)
The details of some of the variables, such as flow time, can be found in Display
the Flow Results of a Meter Run on page 124 .
Load the Configuration from the PC
Follow these steps to load the configuration from the PC.
1. Click Load.
The last saved configuration is loaded from the file on the PC and the
message, “Load successful” appears.
2. Click OK.
Save the Configuration to the PC
Follow these steps to save the configuration to the PC.
1. Click Save.
The message, “Save successful”, appears.
2. Click OK.
Upload the Configuration from the Controller
Follow these steps to upload (read) the configuration from the DataSite
controller.
1. Click Upload.
2. Click OK.
User var1 An instantaneous value of the last hour. This variable is
user-configurable.
User var2
User var3
User var4
Variable Description