Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 260)

Publication 1758-UM002D-EN-P - October 2010
260 DataSite DNP3 Configuration Utility (DS DNP3)
2. Click the Add button for the type of data point you want to add.
For example, if you want to add an AI data point, click Add, select AI in
the Add dialog box that appears, and click OK. Repeat this step until
you have added a data point for each type.
3. Configure the properties for each data point, including the register
address, class, and event value.