Adjust the system time, Close the controller debug dialog box – Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 91
Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 91
Adjust the System Time
There are two ways of adjusting the system time of the DataSite controller.
If you want to synchronize the controller time with the system time of the host
computer to the DataSite controller, do the following.
•
In the Debug dialog box, click Adjust Time.
The controller time will be synchronized with the PC Time.
If you need to set the controller time to a different value as the PC time, for
example, when you need to debug the controller, do the following.
1.
In the Debug dialog box, click Set Time.
The Set Time dialog box appears.
2.
Enter the date and time.
3.
Click OK to write the new time into the controller.
Close the Controller Debug Dialog Box
Follow this step to close the Controller Debug dialog box.
•
Click Exit.