Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 21)

Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 21
Configure Controller
Communication Settings Use Controller Communication settings to set controller parameters, such as
serial port parameters or Ethernet parameters, and low-power settings.
Follow this step to open the Controller Communication Settings dialog box.
• From the Tools menu, choose Controller Communication Settings.
The Controller Communication Settings dialog box appears.
The file, Controller Communication Parameter.esy, located in the
current project directory, is displayed in the project browser file pane.
The Information box displays a status message after each software
operation. For example, if a file is loaded successfully, the message,
"Load from file successful" appears in the Information box.
TIP
You can also double-click the
Controller Communication Parameter.esy file in the project
browser file pane to open the PC Communication Settings
picture.