Use the shortcut menu, Load the scan settings, Use the shortcut menu load the scan settings – Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 48
Publication 1758-UM002D-EN-P - October 2010
48 DataSite Configuration Settings Utility (DS Settings)
Use the Shortcut Menu
You can also use the shortcut menu for Insert, Delete, Copy and Paste
functions.
Follow this step to use the shortcut menu.
•
Right-click the row you want to apply the function to.
The shortcut menu appears.
Here is an example.
Load the Scan Settings
This function enables you to load the scan settings from the file buffer.
This allows you to verify the configuration while the DataSite controller is
offline.
Follow this step to load previously saved scan settings.
•
Click Load.
The last saved Scan Block Parameter configuration is loaded from the
file, Scan Block Parameter.scn and the message, "Load from file
successful", appears in the left corner of the status bar.