Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 120)

Publication 1758-UM002D-EN-P - October 2010
120 DataSite Flow Configuration Utility (DS FloConfig)
Change the Communication Password
Follow these steps to change the communication password.
1. Open the PC Communication tree.
2. In the Password box, enter the old password and then click Apply.
3. Open the FLO Communication tree.
4. In the Communication Password box, enter the new password.
5. Click Download.
The new password is saved to the DataSite controller.
TIP
You can enter any password when uploading settings from
the DataSite controller. The correct password, however, is
required before you can download settings to the DataSite
controller.