Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 158
Publication 1758-UM002D-EN-P - October 2010
158 DataSite Flow Configuration Utility (DS FloConfig)
The following dialog box appears.
3.
Under Flow Run Range, select the meter run whose logs you want to
view.
4.
Under Log Range, select the check box for the type of records you want
to view. You can select both Hourly History and Daily History.
5.
If you have selected the Hourly History check box, click All Days if you
want to retrieve the hourly records for all the past 36 days. Otherwise,
click Select Days and enter the start and end dates for the desired
period.
6.
Click OK.
Some information appears in the status bar. The following is an example
of what would be displayed after clicking OK.
The message “Upload finished” indicates that the upload is completed.
TIP
The length of time required for the records to be uploaded
depends on the number of records selected.