Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 75)

Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 75
Upload the HART Settings from the Controller
Follow this step to upload (read) HART settings from the DataSite controller.
The controller needs to be online before you can upload the settings.
• Click Upload.
Download the HART Settings to the Controller
Follow this step to download (write) HART settings to the DataSite controller.
The controller needs to be online before you can download the settings.
• Click Download.
Clear the Error Count
Follow this step to clear the error count in HART scan data block of
controller.
• Click Clear Err.
Close the HART Settings Dialog Box
Follow this step to close the HART Settings dialog box.
• Click Exit.