Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 151)

Publication 1758-UM002D-EN-P - October 2010
DataSite Flow Configuration Utility (DS FloConfig) 151
Configure the Historical
Records There are two types of historical records the DataSite controller can log: daily
historical records and hourly historical records.
There are two types of variables used in the logging of historical
records—fixed variables and user variables. For user variables, you need to
select the user variables you want to record, and then download the selection
to the controller.
Each hourly and daily record is in the following format:
• Date (format: YYMMDD)
• Time (format: HHMMSS)
• Code for measurement standards (‘0’ represents imperial standards, and
‘1’ represents the metric system)
• Average pressure
• Average temperature
• Average differential pressure or meter pulses
• Relative density
• Volume flow rate at base conditions
• Volume flow rate at flowing conditions
• Mass rate
• Flow extension or uncorrected flow volume
• Energy (reserved)
• User variable 1
• User variable 2
• User variable 3
• User variable 4
The format allows up to four user variables for recording additional
information.