Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 40)

Publication 1758-UM002D-EN-P - October 2010
40 DataSite Configuration Settings Utility (DS Settings)
Open the Scan Settings Dialog Box
Follow these steps to open the Scan Settings dialog box.
• From the Tools menu, choose Scan Settings.
The Scan Settings dialog box appears. The file, Scan Block
Parameter.scn, located in the current project directory, is displayed on
the project browser file pane.
TIP
You can also double-click the Scan Block Parameter.scn file
in the project browser file pane to open the Scan Settings
dialog box.