Command number 3: set the device name, Command number 4: read the device name – Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 285

Publication 1758-UM002D-EN-P - October 2010
Extension Modbus Protocol for DataSite Controllers (1758-FLO) 285
Command Number 3: Set the Device Name
Use command number 3 to set the device name of the 1758-FLO DataSite
controllers. The maximum string length is eight characters.
There is no event code for command number 3.
Command Number 4: Read the Device Name
Use command number 4 to read the device name of the 1758-FLO DataSite
controllers. The maximum string length is eight characters.
Parameters for command number 3
Address
Data Type
Attribute
Description
49025
u_short
RW
3
49026
u_short
R
Return code
49027
u_short
W
Reserved
49028
u_int
W
Pass code for user
49030…49034
—
—
Reserved
49035
u_short
W
Device name 1
49036
u_short
W
Device name 2
49037
u_short
W
Device name 3
49038
u_short
W
Device name 4
49039
u_short
W
Device name 5
49040
u_short
W
Device name 6
49041
u_short
W
Device name 7
49042
u_short
W
Device name 8
Return codes for command number 3
Return Code
Description
00
OK
100
Pass code is incorrect
Other
Invalid
Parameters for command number 4
Address
Data Type
Attribute
Description
49025
u_short
RW
4
49026
u_short
R
Return code
49027
u_short
W
Reserved