Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 34)

Publication 1758-UM002D-EN-P - October 2010
34 DataSite Configuration Settings Utility (DS Settings)
10. Click Upload to upload the controller communication settings again.
The message "Upload from controller successful" appears.
You may encounter a similar scenario when you connect to the Ethernet port
of the controller and change its setting, such as the IP address.
Display the Device Information
Follow this step to display the device information of the DataSite controller.
• Click Device Info.
The device information of the DataSite controller appears in the
Information box.
Close the Controller Communication Settings dialog box
Follow this step to close the Controller Communications Settings dialog box.
• Click Exit.