Open a recent project file, Close ds floconfig, Open a recent project file close ds floconfig – Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 111: Open a recent, Project file
Advertising
Publication 1758-UM002D-EN-P - October 2010
DataSite Flow Configuration Utility (DS FloConfig) 111
Open a Recent Project File
Follow these steps to open a recent project.
1.
In the Start dialog box, click Open Recent Project.
2.
From the list of recent project files, select the project file you want to
open.
3.
Click OK.
The selected project file is open in the DS FloConfig window.
Close DS FloConfig
Follow this step to close DS FloConfig.
•
From the File menu, choose Exit.
Advertising
This manual is related to the following products: