Save the scan settings, Upload the scan settings from the controller, Download the scan settings to the controller – Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 User Manual
Page 209: Clear the error count, Close the scan settings dialog box
Publication 1758-UM002D-EN-P - October 2010
DataSite Flow Configuration Utility (DS FloConfig) 209
Save the Scan Settings
This function saves the scan settings into a file buffer on the PC.
Follow this step to save scan settings.
•
Click Save.
The settings are written to the file, Scan Block Parameter.scn and the
message, "Save into file successful", appears in the left corner of the
status bar.
Upload the Scan Settings from the Controller
Follow this step to upload (read) scan settings from the DataSite controller.
The controller needs to be online before you can upload the settings.
•
Click Upload.
Download the Scan Settings to the Controller
Follow this step to download (write) scan settings to the DataSite controller.
The controller needs to be online before you can download the settings.
•
Click Download.
Clear the Error Count
Follow this step to clear the error count in the scan blocks.
•
Click Clear Err_Cnt.
Close the Scan Settings Dialog Box
Follow this step to close the Scan Settings dialog box.
•
Click Exit.