Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 82)

Publication 1758-UM002D-EN-P - October 2010
82 DataSite Configuration Settings Utility (DS Settings)
Save the Event Settings
Follow this step to save the event settings into the file, Event Parameter.evt, on
the PC.
• Click Save.
If the settings are saved successfully, the message, "Save into file
successful" will appear in the status bar of the Event Settings dialog box.
Load the Event Settings
Follow this step to load event settings from the file, Event Parameter.evt.
• Click Load.
If the settings are loaded from the file successfully, the message, "Load
from file successful" will appear in the status bar of the Event Settings
dialog box.
Close the Event Settings Dialog Box
Follow this step to close the Event Settings dialog box.
• Click Exit.
IMPORTANT
If you have made any changes in the Event Settings dialog
box without saving them, the changes will be discarded
once the saved settings are loaded from the file.