Rockwell Automation 1758-RTU202 DataSite Software User Manual FRN 1.2 - Manual (Page 77)

Publication 1758-UM002D-EN-P - October 2010
DataSite Configuration Settings Utility (DS Settings) 77
Event Examples
For an illustration on how the Event Settings dialog box can be used to
configure an event, see the following examples.
Example for a System Event
Set and get a system event that occurs at one-second intervals.
1. In the Event Settings dialog box, select the Second Event check box.
Then, click Download. Another method is to use EV_SEC_CFG and
EV_RTC_SET to configure the second event.
2. Use EV_GET to read the RTC return value and check bit 0 for the
second event. Bit 0 will be set to ‘1’ when the second event occurs.