Table 5.7: functions of the program table – Yaskawa Sigma II Indexer User Manual
Page 105
Advertising
Sigma II Indexer User’s Manual
Program Table Mode (Mode 0)
5-50
Registration
Position
Setting:
0 ~ 99999999
Registration position [Reference Unit]
-
No registration position reserved.
Setting at shipping:
–
Registration
Speed
Setting:
1 ~ 99999999
Registration speed [x1000 Reference Unit/min.]
Setting at shipping:
1000
Programmable
Output
Setting:
The POUT function sets the output signal configuration at the start of the block. If the output signals need
to change at the end of a block, specify a “-” position move and set the outputs on the following block.
Setting at shipping
:::::
Table 5.7: Functions of the program table
FUNCTION
n = N,A,Z, or :
Advertising