Yaskawa Sigma II Indexer - Manual (Page 166)

Sigma II Indexer User’s Manual Basic Operation
7-3
7.1.2 Functions
The digital operator can be used for parameter settings, operating references, and
status displays.
This section provides information on the keys and their functions available from the
initial displays.
Key Name Function
RESET Key
Press this key to reset the servo
alarm
DSPL/SET Key
• Press this key to select the sta-
tus display mode, auxiliary
function mode, parameter set-
ting mode, or monitor mode.
• This key is used for data selec-
tion in parameter setting mode
DATA/ENTER Key
Press this key to set each param-
eter or display the set value of
each parameter.
Value
Change/
JOG Key
Up Arrow Key
Press this key to increase the set
value. This key is used as a forward
start key in JOG operation.
Down Arrow Key
Press this key to decrease the set
value. This key is used as a reverse
start key in JOG operation.
Digit
Select
Key
Right Arrow Key
• Press this key to select the digit
to be changed. The selected
digit flashes.
• Press the Right Arrow key to
shift to the next digit on the
right.
• Press the Left Arrow key to
shift to the next digit on the left.
Left Arrow Key
SVON Key
Press this key to perform the JOG
operation with the digital operator.