Yaskawa Sigma II Indexer User Manual
Page 69
Advertising
Sigma II Indexer User’s Manual
Sequence I/O Signals
5-14
Output Signal Connections (CN1)
Connect the sequence output signals as shown in the following figure.
Figure 5.5 Output Signal Connections (CN1)
Output Signal Connections (CN4)
Connect the sequence output signals as shown in the following figure.
Figure 5.6 Output Signal Connections (CN4)
Note: Provide a separate external I/O power supply; neither the servo amplifier or the Sigma II Indexer have
an internal 24V power supply.
Advertising