Yaskawa Sigma II Indexer - Manual (Page 8)

Sigma II Indexer User’s Manual Overview
vii
Overview
Manual Outline
This manual provides the following information for the Sigma II Series SGM H/SGDH
servodrives with a JUSP-NS600 Indexer Application Module.
• Procedures for installing and wiring the Sigma II Indexer Application Module.
• Procedures for trial operation of the servodrive.
• Specifications and methods for serial communications.
• Procedures for setting parameters and program tables.
• Procedures for digital I/O and serial mode operation.
• Troubleshooting procedures.
Related Manuals
Refer to the following manuals as required.
Read this manual carefully to ensure the proper use of Sigma II Series servodrives. Also,
keep this manual in a safe place so that it can be referred to whenever necessary.
Refer to Sigma II User’s Manual for the following information.
• Procedures for installing and wiring the servomotor and servo amplifier (encoder, motor
and power).
• Procedures for using functions and adjusting the servodrives:
Selecting a regen resistor, special wiring, tuning and analog monitor.
• Procedures for using the built-in panel operator and the hand-held digital operator.
• Ratings and specifications for standard models.
Manual Name Manual Number Contents
Sigma II Series Servo System
User’s Manual
YEA-S1A-S800-32.2
Describes the procedure used to select
Sigma II Series servodrives and capacities
and detailed information.
Sigma II Series Servo System
Product Catalog Supplement
G-M1#99001D
Describes the procedure used to select
Sigma II Series servodrives and capacities.