Yaskawa J50M Instructions - Manual (Page 246)

PARAMETER NUMBERS AND THEIR CONTENTS
(Cent’d)
Sets no. of remaining movement pulses to be
clamped of handle.
“ 1“ = 1 pulse
X-axi s
Y–axis
Z–axis
4th axis
External work coordinate shift offset amount:
6 digits”
Setting range : “ 1“ = o to
#6692
Y-axis
I
z-axis
4th axis
Form compensation servo follow-up coefficient
Setting range : 0 to 65535
number
O
to to
number 511
#8000 to #8511
Specifies the respective values of lead screw error
compensation.
Setting : 0 to (output increment)
Note : Parameters #6322 to #6339 determine
specific combinations of settings and
axes.
238