Yaskawa MP2000 Series: Built-in SVB or SVB-01 Motion Module User Manual
Page 542
December 2009
5
12.5.3 (2) [c]
Deletion: Alarm code 941 for
Σ-III series SERVOPACK of Servo Driver Alarm
Code (monitoring parameter IW
2D)
November 2009
4
5.1.4
Revision: Description of disadvantages for using absolute mode
6.4.2
Addition: Step1 in (1) Executing/Operating Procedure
September 2009
3
4.4.2 (14)
Revision: Control mode
September 2009
2
Preface
Addition: Warranty
Back cover
Revision: Address
August 2009
1
4.4.2 (10)
Deletion: Related parameters Pn407, Pn408.1, and Pn300
4.4.2 (18)
Slightly revised
4.4.3 (4)
Revision: Description of Bit8
4.4.3 (9)
Revision: “IL
12”
→ “IL
16” in description of Bit4
4.4.3 (13)
Addition: Explanation of the alarm code in Simulation Mode
8.3.1 (2)
Revision: “OL
38” and “OW
3A” unshaded in table
11.1.2 (2)
Revision: Output terminals for Pn50F.2
Back cover
Revision: Address
April 2008
0
All chapters
Slightly revised
Back cover
Revision: Address
December 2007
–
–
–
First edition
Date of Publication
Rev.
No.
WEB
Rev.
No.
Section
Revised Contents
1