Motorola MPC8260 - Manual (Page 156)

4-18 MPC8260 PowerQUICC II UserÕs Manual MOTOROLA
Part II. ConÞguration and Reset
The SICR register bits are described in Table 4-4.
4.3.1.2 SIU Interrupt Priority Register (SIPRR)
The SIU interrupt priority register (SIPRR), shown in Figure 4-11, deÞnes the priority
between IRQ1ÐIRQ6, PIT, and TMCNT.
Table 4-4. SICR Field Descriptions
Bits Name Description
0Р1 С Reserved, should be cleared.
2Ð7 HP Highest priority. SpeciÞes the 6-bit interrupt number of the single interrupt controller interrupt source
that is advanced to the highest priority in the table. HP can be modiÞed dynamically. To retain the
original priority, program HP to the interrupt number assigned to XSIU1.
8Р14 С Reserved, should be cleared.
14 GSIU Group SIU. Selects the relative XSIU priority scheme. It cannot be changed dynamically.
0 Grouped. The XSIUs are grouped by priority at the top of the table.
1 Spread. The XSIUs are spread by priority in the table.
15 SPS Spread priority scheme. Selects the relative YCC priority scheme. It cannot be changed dynamically.
0 Grouped. The YCCs are grouped by priority at the top of the table.
1 Spread. The YCCs are spread by priority in the table.
Bits 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Field XS1P XS2P XS3P XS4P Ñ
Reset 000 001 010 011 0000
R/W R/W
Addr 0x10C10
Bits 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Field XS5P XS6P XS7P XS8P Ñ
Reset 100 101 110 111 0000
R/W R/W
Addr 0x10C12
Figure 4-11. SIU Interrupt Priority Register (SIPRR)