Motorola MPC8260 - Manual (Page 456)

14-2 MPC8260 PowerQUICC II UserÕs Manual MOTOROLA
Part IV. Communications Processor Module
Figure 14-1. SI Block Diagram
If the time-slot assigner (TSA) is not used as intended, it can be used to generate complex
wave forms on dedicated output pins. For instance, it can program these pins to implement
stepper motor control or variable-duty cycle and period control on-the-ßy.
Time-Slot
Assigner (TSA)
R clocks T clocks
R clocks T clocks
R sync T sync
TDM A, B, C, D
Pins Strobes
Route
SI RAM
Tx/Rx
RAM
Control
Mode
Register
TDM A, B, C, D
Tx
TX
Command
Register
Status
Register
SMC1 SMC2 SCC1 SCC2 SCC3 SCC4 MII1/ MII2/
MUX
MII3
To: SMC1 SMC2 SCC1 SCC2 SCC3 SCC4 FCC1 FCC2 FCC3
Multi-Channel
Peripheral Bus
Nonmultiplexed Serial Interface (NMSI) Pins
Channel #
Controllers
Shadow
Register
Clock
Route
RAM
Address
Rx
Rx
UTOPIA UTOPIA
16 8
CPM Mux
Note:
The CPM mux and the MCCs are not part of the SI.
MUX MUX MUX MUX MUX MUX MUX MUX
(MCCs)
(See their respective chapters for details.)