Fcc atm mode register (fpsmr) -86, Table 29-47 describes fpsmr þelds – Motorola MPC8260 User Manual

Page 866

Advertising
background image

29-86

MPC8260 PowerQUICC II UserÕs Manual

MOTOROLA

Part IV. Communications Processor Module

Table 29-47 describes FPSMR Þelds.

Bits

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Field

TEHS

REHS

ICD

TUMS RUMS

LAST PHY/PHY ID

Reset

0000_0000_0000_0000

R/W

R/W

Address

0x11304 (FPSMR1), 0x11324 (FPSMR1), 0x11324 (FPSMR1)

Bits

16 17 18

19

20

21

22

23

24

25

26

27

28

29

30

31

Field

Ñ

TUDC RUDC RXP

TUMP

Ñ

TSIZE RSIZE UPRM UPLM RUMP HECI

Ñ

Reset

0000_0000_0000_0000

R/W

R/W

Address

0x11306 (FPSMR1), 0x11326 (FPSMR2), 0x11326 (FPSMR3)

Figure 29-59. FCC ATM Mode Register (FPSMR)

Table 29-47. FCC ATM Mode Register (FPSMR)

Bits

Name Description

0Ð3

TEHS

Transmit extra header size. Used only in user-deÞned cell mode to hold the Tx user-deÞned
cellsÕ extra header size. Values between 0-11 are valid. TEHS = 0 generates 1 byte of extra
header; TEHS = 11 generates 12 bytes of extra header.

4Ð7

REHS

Receive extra header size. Used only in user-deÞned cell mode to hold the Rx user-deÞned
cellsÕ extra header size. Values between 0Ð11 are valid. For REHS = 0, the receiver expects 1
byte of extra header; for REHS = 11, it expects 12 bytes of extra header.

8

ICD

Idle cells discard
0 Discard idle cells (GFC, VPI, VCI, PTI =0).
1 Do not discard idle cells.

9

TUMS

Transmit UTOPIA master/slave mode
0 Transmit UTOPIA master mode is selected.
1 Transmit UTOPIA slave mode is selected.

10

RUMS

Receive UTOPIA master/slave mode
0 Receive UTOPIA master mode is selected.
1 Receive UTOPIA slave mode is selected.

11Ð15

LAST PHY/

PHY ID

Last PHY. (Multiple PHY master mode only.) The UTOPIA interface polls all PHYs starting
from PHY address 0 and ending with the PHY address speciÞed in LAST PHY. (The number of
active PHYs are LAST PHY+1). LAST PHY should be speciÞed in both multiplex and direct-
polling modes.
PHY ID. (Multiple PHY slave mode only.) Determines the PHY address of the ATM controller
when conÞgured as a slave in a multiple PHY ATM port.

16Р18

С

Reserved, should be cleared.

19

TUDC

Transmit user-deÞned cells
0 Regular 53-byte cells.
1 User-deÞned cells.

20

RUDC

Receive user-deÞned cells
0 Regular 53-byte cells.
1 User-deÞned cells.

Advertising