4 vbr protocol-specific tcte, Vbr protocol-specific tcte -56, Aal0-specific tct field descriptions -56 – Motorola MPC8260 User Manual

Page 836: Vbr-specific tcte field descriptions -56

Advertising
background image

29-56

MPC8260 PowerQUICC II UserÕs Manual

MOTOROLA

Part IV. Communications Processor Module

Table 29-24 describes AAL0 protocol-speciÞc TCT Þelds.

29.10.2.3.4 VBR Protocol-SpeciÞc TCTE
Figure 29-34 shows the VBR protocol-speciÞc TCTE.

Table 29-25 describes VBR protocol-speciÞc TCTE Þelds.

Table 29-24. AAL0-Specific TCT Field Descriptions

Offset

Bits

Name

Description

0x10

0Р7

С

Reserved, should be cleared.

8

0

Must be 0.

9

CR10

CRC-10
0 CRC10 insertion is disabled.
1 CRC10 insertion is enabled.

10

Ñ

Reserved, should be cleared.

11

ACHC

ATM cell header change
0 Normal operation ATM cell header is taken from AAL0 buffer.
1 VPI/VCI (28 bits) are taken from TCT.

12Р15

С

Reserved, should be cleared.

0x12Ð
0x14

С

С

Reserved, should be cleared.

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Offset + 0x00

SCR

Offset + 0x02

Burst Tolerance (BT)

Offset + 0x04

Out of Buffer Rate (OOBR)

Offset + 0x06

Sustain Rate Remainder (SRR)

SCR Fraction (SCRF)

Offset + 0x08

Sustain Rate (SR)

Offset + 0x0A

Offset + 0x0C

VBR2

Ñ

Offset + 0x0E-1E

Ñ

Figure 29-34. Transmit Connection Table Extension (TCTE)ÑVBR Protocol-

Specific

Table 29-25. VBR-Specific TCTE Field Descriptions

Offset

Bits

Name

Description

0x00

Ñ

SCR

Sustain cell rate. Holds the sustain cell rate (in slots) permitted for this channel according to
the trafÞc contract. To pace the channelÕs sustain cell rate, the APC performs a continuous-
state leaky bucket algorithm (GCRA).

0x02

Ñ

BT

Burst tolerance. Holds the burst tolerance permitted for this channel according to the trafÞc
contract. The relationship between the BT and the maximum burst size (MBS) is BT=(MBS-2)
´ (SCR-PCR) + SCR.

0x04

Ñ

OOBR Out-of-buffer rate. In out of buffer state (when the transmitter tries to open TxBD whose R bit

is not set) the APC reschedules the current channel according to OOBR rate.

Advertising