Allied Telesis AT-S63 - Manual (Page 105)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features 105
Deleting a Port Trunk
Caution
Disconnect the cables from the port trunk on the switch before
performing the following procedure: Deleting a port trunk without
first disconnecting the cables can create loops in your network
topology. Data loops can result in broadcast storms and poor
network performance.
To delete a port trunk from the switch, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. From the Configuration menu, select the Layer 1 option.
The Layer 1 page opens with the Port Settings tab displayed by
default, as shown in Figure 18 on page 74.
3. Select the Port Trunking tab.
The Port Trunking tab is shown in Figure 27 on page 100.
4. Click the button next to the port trunk you want to delete and click
Remove.
The port trunk is deleted from the switch.
5. To permanently save the change, return to the General tab on the
System page and click Save Changes.
For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.