Allied Telesis AT-S63 - Manual (Page 80)

Chapter 6: Port Parameters
80 Section I: Basic Features
Note
Ports 23 and 24 are always set to Auto, and you cannot change the
setting.
Note
The Auto setting is not available if you set a port’s speed and duplex
mode manually.
7. After you have made the desired changes, click Apply.
The switch activates the parameter changes on the port.
8. To permanently save the change, return to the General tab on the
System page and click Save Changes.
For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.