Saving the event log to a file – Allied Telesis AT-S63 User Manual
Page 139
AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features
139
Saving the Event Log to a File
You can save the event log to a file to review later. The file is saved as an
ASCII file so that you can also email the file to someone else for
troubleshooting.
To save the event log to a file, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. Select the Event Log tab.
The Event log tab is shown in Figure 36 on page 128.
3. In the Filter Settings and Actions section, select the type of events
you want to save to the file.
4. In the Save Filename field, enter a name for the file with a
.log
file
name extension.
5. Click Save.
The log file is saved on the switch as an ASCII file.
6. To upload the file to your management station for viewing or sending
with an email, refer to ”Uploading a File” on page 125.