Displaying the cos settings – Allied Telesis AT-S63 User Manual
Page 150
Advertising
Chapter 12: Quality of Service
150
Section II: Advanced Features
Displaying the CoS Settings
To display the CoS settings, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44
2. From the Monitoring menu, select the QoS option.
The QoS page is displayed with the CoS tab selected by default, as
shown in Figure 43.
Figure 43. CoS Tab (Monitoring)
3. Click the port where you want to view the settings. You can select
more than one port at a time. A selected port turns white. (To deselect
a port, click it again.)
4. Click View.
The CoS Setting for Port page is shown in Figure 44.
Figure 44. CoS Setting for Port Page
Advertising