Allied Telesis AT-S63 - Manual (Page 250)

Chapter 16: SNMPv3
250 Section II: Advanced Features
5. In the Message Processing Model field, enter a Security Model that is
used to process messages.
Select one of the following SNMP protocols:
v1
Select this value to process messages with the SNMPv1 protocol.
v2c
Select this value to process messages with the SNMPv2c protocol.
v3
Select this value to process messages with the SNMPv3 protocol.
6. In the Security Model field, select one of the following SNMP protocols
as the Security Model for this Security Name, or User Name.
v1
Select this value to associate the Security Name, or User Name,
with the SNMPv1 protocol.
v2c
Select this value to associate the Security Name, or User Name,
with the SNMPv2c protocol.
v3
Select this value to associate the Security Name, or User Name,
with the SNMPv3 protocol.
7. In the Security Name field, enter a User Name that you previously
configured with the SNMPv3 User Table.
See ”Creating a User Table Entry” on page 207.
8. In the Security Level field, select one of the following Security Levels:
Note
The value you configure for the Security Level must match the value
configured for the User Name in the SNMPv3 User Table Menu. See
”Creating a User Table Entry” on page 207.
No Authentication/Privacy
This option represents neither an authentication nor privacy
protocol. Select this security level if you do not want to
authenticate SNMP entities and you do not want to encrypt
messages using a privacy protocol. This security level provides the
least security.