Allied Telesis AT-S63 - Manual (Page 206)

Chapter 16: SNMPv3
206 Section II: Advanced Features
3. Click the Enable SNMP Access checkbox to enable or disable SNMP
management. A check in the box indicates that the feature is enabled,
meaning that the switch can be managed from an SNMP
management station. No check indicates that the feature is disabled.
The default is disabled.
Use this parameter to enable the switch to be remotely managed
with an SNMP application program.
Note
If the Enable SNMP Access check box is not checked, the switch
cannot be managed through SNMP. This is the default.
4. If you want the switch to send authentication failure traps, click the
Enable Authentication Failure Traps checkbox. A check in the box
indicates that the switch sends the trap.
5. Click Apply.
6. To save your changes, return to the General tab and click Save
Changes.