Allied Telesis AT-S63 - Manual (Page 262)

Chapter 16: SNMPv3
262 Section II: Advanced Features
Displaying
Access Table
Entries
To display entries in the SNMPv3 Access Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 94 on page 259.
3. In the SNMPv3 section, click the button next to View Access Table
and then click View at the bottom of the tab.
The SNMPv3 Access Table tab is shown in Figure 97.
Figure 97. SNMPv3 Access Table Tab (Monitoring)