Allied Telesis AT-S63 - Manual (Page 228)

Chapter 16: SNMPv3
228 Section II: Advanced Features
The SNMPv3 SecurityToGroup Table tab is shown in Figure 79.
Figure 79. SNMPv3 SecurityToGroup Table Tab (Configuration)
4. To create an SNMPv3 SecurityToGroup Table entry, click Add.
The Add New SNMPv3 SecurityToGroup page is shown in Figure
80.
Figure 80. Add New SNMPv3 SecurityToGroup Page
5. In the Security Model field, select the SNMP protocol that was
configured for this User Name.
Choose from the following:
v1
Select this value to associate the Group Name with the SNMPv1
protocol.