Allied Telesis AT-S63 - Manual (Page 345)

AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Security 345
MaxReq
The maximum number of times that the switch retransmits an
EAP Request packet to the client before it times out the
authentication session.
For supplicant port(s), the Supplicant Port Parameters Page is
displayed, as shown in Figure 136.
Figure 136. Supplicant Port Parameters Page
The Supplicant Port Parameters page displays a table that
contains the following columns of information:
Port
The port number.
AuthPeriod
The period of time in seconds that the supplicant waits for a reply
from the authenticator.
HeldPeriod
The amount of time the supplicant is to refrain from trying to
recontact the authenticator in the event that the end user
provides an invalid user name and/or password.
MaxStart
The maximum number of times the supplicant sends EAPoL-Start
packets before assuming that there is no authenticator present.
StartPeriod
The time period between successive attempts by the supplicant
to establish contact with an authenticator when there is no reply.
User Name
The user name for the port.
User Password
The password for the port.