Displaying the dos settings – Allied Telesis AT-S63 User Manual
Page 355
AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Security
355
Displaying the DoS Settings
To display the DoS settings, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44
2. From the Monitoring menu, select the Security option.
The Security page opens with the 802.1x Port Access tab selected
by default, as shown in Figure 133 on page 342.
3. Select the DoS tab.
The DoS tab is shown in Figure 141.
Figure 141. DoS Tab (Monitoring)
4. Click the port whose DoS settings you want to view. You can select
more than one port at a time.
5. Using the DoS Type list, select the type of denial of service defense
whose settings you want to view.
6. Click View.