Allied Telesis AT-S63 User Manual
Page 280
Advertising
Chapter 17: Virtual LANs
280
Section III: VLANs
5. If you select one of the multiple VLAN modes, specify an uplink port in
the Uplink Port field. This port functions as the uplink port for the
VLANs. The default is port 1.
6. Click Apply.
The new mode is automatically activated on the switch.
7. To permanently save the change, return to the General tab on the
System page and click Save Changes.
For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.
Advertising