Allied Telesis AT-S63 - Manual (Page 125)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 125
Uploading a File
This procedure explains how to upload a file from the switch’s file
system to a TFTP server on your network using the web browser
interface. You can upload any of the following files:
❑ Boot configuration file
❑ Public encryption key
❑ CA certificate
❑ CA enrollment request
Note
The public key, CA certificate, and CA enrollment request are
supported only on the version of AT-S63 management software that
features SSL, PKI, and SSH security.
Note the following before you begin this procedure:
❑ You must use TFTP to download a file from a web browser
management session.
❑ There must be a node on your network that contains the TFTP
server software.
❑ You should start the TFTP server before you begin the upload
procedure:
To upload a file, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default.
2. Select the System Utilities tab.
The System Utilities tab is shown in Figure 35 on page 123.
Note
The top portion of the tab is used to return the switch to its factory
default settings. For instructions, refer to ”Returning the AT-S63
Management Software to the Factory Default Values” on page 50.
3. In the TFTP Server IP Address field, enter the IP address of the network
node that contains the TFTP server software.