E tab is shown in figure 62 – Allied Telesis AT-S63 User Manual
Page 185
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features
185
Figure 62. Configure MSTP Parameters Tab (Configuration)
Note
This procedure explains the Configure MSTP Parameters section of
the page. The CIST/MSTI Table is explained in ”Adding, Removing, or
Modifying VLAN Associations to MSTIs” on page 192. The graphic
image of the switch is described in ”Configuring MSTP Port
Parameters” on page 195.
Adjust the following parameters as necessary.
Advertising