Deleting an snmpv1 and snmpv2c community – Allied Telesis AT-S63 User Manual
Page 61
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features
61
Deleting an SNMPv1 and SNMPv2c Community
To delete an existing SNMPv1 and SNMPv2c community, perform the
following procedure:
1. From the home page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 40.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 9 on page 54.
3. In the SNMPv1 & SNMPv2c section, click Configure.
The SNMPv1 & SNMPv2c Communities tab is shown in Figure 10
on page 56.
4. Click the button next to the community name and click Remove.
A warning message is displayed.
5. Click OK.
6. To save your changes, return to the General tab and click Save
Changes.
Advertising